Agilent Technologies Agilent E5250A - Manual (Page 125)

Agilent E5250A User’s Guide, Edition 11 5-31
Controlling the E5250A
Using Virtual Front Panel Utility
Defining Labels for the E5250A Input Ports
You can define labels to use for the input ports of each row in the MEMORY
SETUP PANEL.
Select the DEFINE LABEL softkey. The DEFINE LABEL MENU and following
softkeys are displayed:
To define labels for the E5250A input ports
Select the E5250A INPUT softkey. The following softkeys are displayed.
Select the INPUTn LABEL softkey (n=1 to 10). The following message is
displayed:
Input Label Name. (Max 5 char string)
Type desired label (maximum 5 characters), then press the Enter key.
If you press the Enter key without typing any characters, the label is cleared.
Softkey Description
E5250A
INPUT For displaying softkeys to select the desired input ports. See below.
CARDn
INPUT
(n=1 to 4) For selecting the E5255A. You can define a label for the input Bias
Port of selected E5255A. This softkey is displayed only for card
slots that have the E5255A installed. See next page.
MAIN
MENU For returning to VFP main menu.
Softkey Description
INPUTn
LABEL
(n=1 to 10) For selecting the E5250A input port. You can define a label for the
selected input port. See below.
MORE For displaying more softkeys to select the input port. This softkey
toggles between the INPUTn LABEL softkeys n=1 to 5 and n=6 to
10.
RETURN For returning to the DEFINE LABEL MENU.