Agilent Technologies Agilent E5250A - Manual (Page 204)

7-36 Agilent E5250A User’s Guide, Edition 11
Command Reference
[:ROUTe]:COUPle:PORT?
[:ROUTe]:COUPle:PORT?
NOTE This command applies only to the E5252A card.
This query command returns the lower input port number of each coupled pair. For
details, refer to "Couple Ports" in Chapter 5.
Syntax [:ROUTe]:COUPle:PORT? card_number
Query response port_number{,port_number} <newline><^END>
port_number = 1 or 3 or 5 or 7 or 9
Example OUTPUT @Hp5250;":ROUT:COUP:PORT ALL,'1,3'"
OUTPUT @Hp5250;":ROUT:COUP:PORT? 1"
ENTER @Hp5250;A$
In above example, A$ will be as follows:
1,3
Parameter Explanation
card_number card number:
For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, or 4