Agilent Technologies Agilent E5250A - Manual (Page 188)

7-20 Agilent E5250A User’s Guide, Edition 11
Command Reference
:ROUTe Command Tree
:ROUTe Subsystem
The :ROUTe subsystem has commands for controlling the signal routing.
"Open a channel": opens relays to disconnect the channel (that is, disconnects input
port from output port).
"Close a channel": closes relays to connect the channel (that is, connects input port
to output port).
:ROUTe Command Tree
Command Parameter
[:ROUTe]
:BIAS
:CHANnel
:DISAble
:CARD card_number | ALL
[:LIST] (@channel_list)
[:LIST]? (@channel_list)
:ENABle
:CARD card_number | ALL
[:LIST] (@channel_list)
[:LIST]? (@channel_list)
:PORT card_number | ALL,bias_port
:PORT? card_number
[:STATe] card_number | ALL,state
[:STATe]? card_number
:CLOSe
:CARD? card_number
[:LIST] (@channel_list)
[:LIST]? (@channel_list)