To install blank panel, To install blank panel -9 – Agilent Technologies Agilent E5250A User Manual
Page 41
Advertising
Agilent E5250A User’s Guide, Edition 11
2-9
Installation
Installing the E5250A
Figure 2-1
Module Extractor and Location of the Screw Hole
To Install Blank Panel
CAUTION
To prevent thermal damage to the E5250A cards, be sure that blank panels (Agilent
part number E5250-60003) are installed in all unused slots.
If the blank panel is not installed to cover an unused slot, install the blank panel as
follows:
1. Align the blank panel over the unused slot.
2. Screw in the screws on the left and right edges of the blank panel by using the
wrench furnished with the E5250A.
Module Extractor
Screw Hole
for Module Extractor
Agilent E5255A
Agilent E5252A
Advertising