Agilent Technologies Agilent E5250A - Manual (Page 183)

Agilent E5250A User’s Guide, Edition 11 7-15
Command Reference
:DIAGnostic Command Tree
:DIAGnostic Subsystem
The :DIAGnostic subsystem has commands for executing the self-test function. For
more info, see Chapter 3.
NOTE The :DIAGnostic subsystem commands ignore the E5250A channel configuration
mode. For :DIAG commands that require a card number, you specify 1, 2, 3, 4, or
ALL.
:DIAGnostic Command Tree
Parameter values:
card_number: 1 | 2 | 3 | 4
Command Parameter
:DIAGnostic
:TEST
:CARD
:CLEar card_number | ALL
[:EXECute]? card_number | ALL
:STATe? card_number
:FRAMe
:CLEar CONTroller | FPANel
[:EXECute]? CONTroller | FPANel
:STATe? CONTroller | FPANel