Agilent Technologies Agilent E5250A - Manual (Page 182)

7-14 Agilent E5250A User’s Guide, Edition 11
Command Reference
*TST?
*TST?
This query command executes an internal self-test, then returns the result. After this
command execution, the E5250A becomes same status as after *RST command
execution.
Syntax *TST?
Query response test_result <newline><^END>
Example OUTPUT @Hp5250;"*TST?"
ENTER @Hp5250;A
*WAI
This command stops execution of any commands until the Operation Complete
(OPC) bit is set to 1, which means there is no pending operation. Refer to *OPC
command.
Syntax *WAI
Example OUTPUT @Hp5250;"*WAI"
test_result Explanation
0 pass
1 fail