Agilent Technologies Agilent E5250A - Manual (Page 325)

Agilent E5250A User’s Guide, Edition 11 12-7
SCPI Command Summary
[:ROUT]:COUP[:STAT]? card_number Returns Couple Mode of specified card.
0: Couple Mode is OFF
1: Couple Mode is ON.
card_number:
For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, 4
[:ROUT]:FUNC channel_config Sets the channel configuration mode.
channel_config:
ACON: Auto Config Mode
NCON: Normal Config Mode
[:ROUT]:FUNC? Returns present channel configuration:
ACON: Auto Config Mode
NCON: Normal Config Mode
[:ROUT]:OPEN:CARD card_number Disconnects all input ports from all output ports for
specified card.
card_number:
For Auto Config mode: 0 or ALL
For Normal Config mode: 1, 2, 3, 4, or ALL
[:ROUT]:OPEN[:LIST] (@channel_list) Disconnects the input ports from output ports as
specified in channel_list.
channel_list: Channels to open.
[:ROUT]:OPEN[:LIST]? (@channel_list) Returns whether specified channels are opened.
0: channel is closed (connected)
1: channel is opened (disconnected)
channel_list: Channels to check.
:SYST:CCON? card_number Returns the card configuration information:
E5252A: no info returned.
E5255A: input port and resistance info for each
block.
card_number: 1, 2, 3, or 4
Command Description