Bias mode example, Bias mode example -16 – Agilent Technologies Agilent E5250A User Manual
Page 152
Advertising
6-16
Agilent E5250A User’s Guide, Edition 11
Programming the E5250A
Programming Examples
Bias Mode Example
The following example shows how to use Bias Mode for the E5255A.
Figure 6-2
Example of Bias Mode
Required
Conditions:
This program assumes the following conditions.
E5250A Installed Cards:
•
Slot 1: E5255A
•
Slot 2 to 4: not used.
E5250A Input Ports:
•
SMU INPUT 1: should be connected to instrument.
•
SMU INPUT 2 to 6: not used.
•
AUX INPUTs: not used.
E5255A Connection:
•
IV Input Connection: IVin1 should be connected to the E5250A SMU INPUT 1.
•
Bias Input Connection: BIAS INPUT 51 should be connected to bias source.
E5255A Output Ports:
•
Block 1: outputs 1 to 8 are used in the program.
•
Block 2 and 3: not used.
Advertising