Agilent Technologies Agilent E5250A - Manual (Page 189)

Agilent E5250A User’s Guide, Edition 11 7-21
Command Reference
:ROUTe Command Tree
Parameter values:
card_number: Auto Config Mode: 0
Normal Config Mode: 1 | 2 | 3 | 4
channel_list: Refer to Chapter 5.
state: ON | OFF | 0 | 1
rule: FREE | SROU
channel_config: ACON | NCON
sequence: NSEQ | BBM | MBBR
Command Parameter
[:ROUTe]
:CONNection
:RULE card_number | ALL,rule
:RULE? card_number
:SEQuence card_number | ALL,sequence
:SEQuence? card_number
:COUPle
:PORT card_number | ALL,'couple_port'
:PORT? card_number
[:STATe] card_number | ALL,state
[:STATe]? card_number
:FUNCtion channel_config
:FUNCtion?
:OPEN
:CARD card_number | ALL
[:LIST] (@channel_list)
[:LIST]? (@channel_list)