Agilent Technologies Agilent E5250A - Manual (Page 134)

5-40 Agilent E5250A User’s Guide, Edition 11
Controlling the E5250A
Using Virtual Front Panel Utility
Softkey Menu 1:
NOTE Moving the Cursor
Move the cursor by using the UP, DOWN, RIGHT, LEFT softkeys. Do not use
arrow keys on the 4155/4156 front panel.
Softkey Description
OPEN/
CLOSE Changes the relay state (open or close) of crosspoint selected by the
cursor. The softkey toggles the state between open and close. The
E5250A settings are changed in real time.
If bias mode is ON and cursor is in the row of input bias port, this
softkey changes the relay state; open, close, and bias disabled.
. means open.
@ means close.
− means bias disabled.
When bias mode is ON, if you disconnect a bias enabled output port
from a non-bias input port, the output port is automatically
connected to the input bias port.
UP Moves the cursor upward.
LEFT Moves the cursor to the left.
RIGHT Moves the cursor to the right.
DOWN Moves the cursor downward.
MORE Displays more softkeys. The displayed softkeys depend on whether
cursor selects input Bias Port and Bias Mode is ON. See Softkey
Menu 2 and Menu 3 on next pages.
RETURN Displays the previous level of the softkey menu, shown previously
in "To Modify the Settings in Current Setup Memory".