ETC Cobalt Family v7.1.0 - Manual (Page 1032)

Cobalt 7.1 - 20140612
1031
• Fader and Attribute values are 0.0 to 1.0 (float) for minimum and maximum. eg
"/masters/fader/1 0.5" to set Master 1 to 50%"
The following commands are supported:
Refresh
/refreshstatus = Command to force an update of all labels and fader values
Masters
/masters/fader/X <0.0-1.0>
/masters/key/X <0.0-1.0>
/masters/flash/X <0.0-1.0>
/masters/pagePlus/X = Page+ for master block X (1-4)
/masters/pageMinus/X = Page- for master block X (1-4)
/masters/page/X = Master page (1-999)
Transmit:
/masters/fader/X <0.0-1.0> = transmission when a fader value changes
/masters/label/X <string> = Sends master label changes
/masters/page/label/X <string> =Sends master page label changes
Main Playback
/mainplayback/go
/mainplayback/pause
/mainplayback/goback
/mainplayback/seq+
/mainplayback/seq-
/mainplayback/refresh
Effects
/effects/bpm/X
/effects/tap/X
Direct parameter control
/parameter/pan <0.0-1.0>
/parameter/tilt <0.0-1.0>
/parameter/hue <0.0-1.0>
/parameter/saturation <0.0-1.0>
/parameter/intensity <0.0-1.0>
/parameter/pantilt <float> <float>
/parameter/huesaturation <float> <float>
Independents
/independents/fader/X <0.0-1.0> X= 1-6
/independents/key/X <0.0-1.0> X = 7-9
Direct Selects
/directselects/page/X, X = 1-5
/directselects/key/X, X = 1-40
Transmit:
Cobalt will send bank labels and direct select labels when they change: