Tutorial - power up – ETC Cobalt Family v7.1.0 User Manual
Page 1037
Advertising
Cobalt 7.1 - 20140612
1036
Tutorial - Power up
Start by powering up your system and loading an empty or demo show.
• Connect at least one monitor. In Congo Jr you need to use a DVI splitter - the VGA
connector is not in use.
• Press power-up in the back of the console.
- The startup screen should appear looking like this.
• Press MODIFY to run the Cobalt application. Once it is loaded you will get a dialogue asking
if you want to use the last save show or start an new (empty) one.
• Press Down Arrow to select NEW PLAY. Press MODIFY to select. You will get a dialogue
with the most important default settings.
Advertising