ETC Cobalt Family v7.1.0 - Manual (Page 779)

Cobalt 7.1 - 20140612
778
Main Playback - Time Settings
Hold SETUP and press TIME to open the Settings.
Setting Feedback
Set times to Times are set to the step in B (default). You can set
them to the step in A as well.
Time: Use % as default Times for FCB will be set in % of the main fade
time.
Default Go time The default time that is only used if no time is set, is
set to 5 seconds.
Default Go Back time The default time is set to 2 seconds.
Default Out/In time The default out/in time will be set and stored as #
seconds.