ETC Cobalt Family v7.1.0 - Manual (Page 376)

Cobalt 7.1 - 20140612
375
Keep original spacing and gaps will keep preset numbering as it was in the old play, using the start
at value to create an offset. For example, if you drag in presets numbered 1, 1.5 and 3 into the current
play with a start at value of 5, the new presets will be numbered 5, 5,5 and 8.
Convert to Consecutive Numbers will clean up decimals and gaps in the preset list - so dragging in
the same three presets 1, 1.5 and 3 into the current play using this setting and a start at value of 5 will
create presets 5, 6 and 7.