ETC Cobalt Family v7.1.0 - Manual (Page 218)

Cobalt 7.1 - 20140612
217
3. Select Fetch Play and press MODIFY. You will get a confirmation message in the bottom of the
screens.
Once the Play is transferred you have the same Play information in both consoles. The Play file name
is transferred, and the playbacks in the receiving system will position to the same steps as in the main
system. If you make changes in either console, you have to transfer the Play to update the other
console. This guarantees that a programming crash in one system won't bring down the other system.
NOTE
The Play is transferred, but not saved. You have to save it manually.
There is an Auto-transfer Play option in the Backup Settings. See Network -
Backup Setup .