ETC Cobalt Family v7.1.0 - Manual (Page 354)

Cobalt 7.1 - 20140612
353
See Navigating - Channel Views .
NOTE
You can only edit attributes with console functions (wheels and keys). If you
want to edit attributes on the screen, move to the Attributes cell and press
MODIFY to open the Preset Attribute Editor.
Preset List - Columns
Column Input Function
Preset No input The number of this Preset - cannot be
edited.
Text ABCDE... Press MODIFY to activate and end text
input. This text is shown also in the
Playback views.
Channels No input Shows how many channels/devices that
are stored with an intensity in this Preset
Attributes [MODIFY] Shows how many moving devices are
stored in this Preset. MODIFY opens
the attribute editor.
Dynamics [MODIFY] Shows how many Dynamics are stored
in this Preset. MODIFY opens the
Dynamics editor.
Mask [MODIFY] Open the Mask editor where you can
mask any parameter.
FCB-Time [#] [MODIFY] Hold C and press MODIFY to enter a
time in seconds instead of % of the main
fade times.
FCB-Delay [#] [MODIFY] Hold C and press MODIFY to enter a
time in seconds instead of % of the main
fade times.
Note [MODIFY] Opens the Note list for a note