ETC Cobalt Family v7.1.0 - Manual (Page 898)

Cobalt 7.1 - 20140612
897
Keyboard equivalent: [C/Alt
Console Key - CH ONLY MODE
The CH ONLY MODE key is used to activate the Channels Only Mode for the console, providing a
single scene single channel control for simple hands on. The patch is active.
• [CH_ONLY_MODE] - Toggles Channels Only Mode on/off.
For more information see Channels - Ch Only Mode .
Keyboard equivalent: [-] & [+] on the numerical keypad
Console Key - CHANNEL
The CHANNEL key is used to select channels, and in combination with other keys for additional
channel functions.
• [#] [CHANNEL] - Select that channel (if you are operating in At Mode, this key is not used
in the same way).
• [C/Alt] & [CHANNEL] - Clear levels and channel selection in the selected channel view.
• [CHANNEL] & [up/down arrow] - Scroll in the selected channel view.
• [CHANNEL] & [@LEVEL] - Set the levels of the selected channel(s) temporarily to 100%
for identifying.
• [#] [CHANNEL] & [TIME] - Record a channel time for the selected channel(s).
• [#] [CHANNEL] & [DELAY] - Record a channel Delay for the selected channel(s).
• [ON/FETCH]&[CHANNEL] - Revert (undo) level changes back to value at initial selection.
For more information see Select Channels .
Keyboard equivalent: [-]
Console Key - CHANNEL SET
The CHANNEL SET soft key in the EFFECTS soft key menu, is used to open the Channel Set editor
for effects.
• [CHANNEL SET] - Opens the Channel Set editor.
For more information see Channel Sets
There is no keyboard equivalent