ETC Cobalt Family v7.1.0 User Manual

Page 167

Advertising
background image

Cobalt 7.1 - 20140612

166

Network - Update Service

Update Service (TFTP)

Clicking in the enable box will start the TFTP (Trivial File Transfer Protocol) server.

Update File Path - This sets the directory where network device firmware files are to be

served through TFTP. This must be the full path to the directory, including internal drive
letter. The default is: C:\etc\nodesbin

Network - Time Service

Time Service (SNTP)

Enabling this starts the SNTP (Simple Network Time Protocol) service.
The console can run either as a client (receiving time messages) or as a server (sending time
messages).

External Time Server

Cobalt can also get the current time from an external NTP server.

External Server IP:

If External Time Server is enabled, enter the IP address of the Time Server here, eg if you
have a local server that is to be the definitive source of the current time for the console..

Advertising