ETC Cobalt Family v7.1.0 - Manual (Page 410)

Cobalt 7.1 - 20140612
409
Sequence - Build Sequence Mode
This mode is set in the Crossfade Settings. See System Settings - Crossfade .
The default setting for this mode is ON. When ON every Preset recorded in the Live or A tab will
automatically be added to the Sequence in the Main Playback (in numerical order). The only reason to
set this mode to OFF is when a Preset recorded in Live or A should NOT be added to the sequence in
the Main Playback.
NOTE
You can record a Preset without adding it to the Sequence in the Main
Playback with a shortcut; # RECORD & PRESET
See Record Preset - Do not add to Sequence
Sequence - Modify Sequence Mode
Press MODIFY SEQ in the Misc Soft Key Page to toggle. See Navigating - Misc Soft Key Page .