ETC Cobalt Family v7.1.0 - Manual (Page 639)

Cobalt 7.1 - 20140612
638
Device Palettes - Focusing Mode
Focusing mode is designed for quickly focusing and updating palettes. It works together with the List
section of the LCD Display. It is activated from the FOCUS MODE soft-key in the DEVICE Soft
page.
Action Key Feedback
1. Select the DEVICE soft
page [DEVICE]
(Softkey) The Device soft functions
are selected in the Main
Display of the console.
2. Activate Focus Mode [FOCUS_MODE]
(Softkey)
"Focusing mode" is shown
on the Main Display. The
Focus Palette list is
automatically activated.
3. Select Palette from the
list Use the Trackball Disp
List function to select a
Palette The corresponding
channels are selected and
displayed in the Channel
Display list. The palette is
activated and Highlight
mode is turned on.
4. Focus one by one with
NEXT/LAST [NEXT] & [LAST] Each focused channel is
mapped to the channel
controls.
5. Update the Palette [UPDATE_PALETTE]
(Softkey) The Palette is updated and
you are returned to the
Focus Palette list to select a
new Palette.
6. Exit Focus Mode [FOCUS_MODE]
(Softkey)
Focusing mode is exited.