ETC Cobalt Family v7.1.0 - Manual (Page 586)

Cobalt 7.1 - 20140612
585
Device Control - U1-U2-U3
The parameter group keys U1-U3 in the programming section can be set up with any mix of device
parameters. Each of them have three sub-pages. This makes a total of nine user definable parameter
pages.
This editor is opened by holding MODIFY and pressing U1-U3 or a Wheel key when a bank (U1-U3)
is selected.
NOTE
Each User Bank (U1-U3) has three parameter pages (1-3). They are shown in
the same editor.