ETC Cobalt Family v7.1.0 - Manual (Page 1033)

Cobalt 7.1 - 20140612
1032
/directselects/page/label/x
/directselects/label/x
Action Macro
/actionmacro <string>
Executes the Action Macro in <string>
For example:
/actionmacro GO PB
If you are sending from Max, make sure that the whole command is sent as one string parameter,
using “” around it when necessary.
Transmit - OSC Output
OSC output can be transmitted from an Action Macro, or from a template. In addition, sequence texts
and master levels are transmitted to remote devices - see
Receive - OSC Input .
To transmit OSC commands you have to activate transmittion of OSC and select a port (default 8000)
and IP address(es) of the devices to send to in
Play Settings - Show Control .
Action Macro OSC
See
Cobalt Action Macros .
Template OSC
It is possible to define any parameter in a template to send optional OSC data. In the Template editor,
there is now a new column called OSC. It will open a dialog where OSC parameters can be defined.
Scaling through Max value is supported.
Press MODIFY or double-click on OSC