ETC Cobalt Family v7.1.0 - Manual (Page 48)

Cobalt 7.1 - 20140612
47
Output protocols are distributed using etCnet2 DmX nodes or net3 DmX/rDm Gateways. I/o
Gateways and Show Control Gateways provide switch-closure functionality, mIDI and SmPte time
code.Cobalt 20 is offered as a base console with 5000 control channels and 4096 outputs (8 universes
of DmX512a). a single control channel may control only intensity (dimmers) or it may control a
DmX-controlled device (moving light, leD, media server, etc.).to increase the capacity of the console,
order additional 512-output upgrades. for example, to take the console to its maximum configuration,
order a console and twenty-four (24) 512-output upgrades.4096 outputs + (24x512) = 16,384 outputs
(32 universes of DmX512)two universes are available at the console via 5-Pin Xlr and all universes
may be distributed via ethernet-based methods, including net3 DmX/rDm Gateways, etCnet2 DmX
nodes and/or artnet nodes (purchased separately).
Cobalt Accessories
• Net3 rfr etC net3 radio focus remote
• Net3-rfr-rX etC net3 radio focus remote, receiver only
• Net3-rfr-tX etC net3 radio focus remote, transmitter only
• CBlt littlite Cobalt littlite® Worklights (spare)
• CBlt20 flight-case
• Cobalt flightcase
• Net3 rVI etCnet3 remote Video Interface
• 19” lCD 19” flat-screen display (1280x1024)
• 19”lCD-t 19” touchscreen display
• Wmon Wide-format flat-screen display
• WmontS Wide-format multi-touch display
• Cobalt offline editor software for mac and PC platforms is available for download from
www.etcconnect.com
Ships with
• Power cord
• Dust cover
• 2 Littlite® work lights
• Mouse and mousepad
• External alpha-numeric keyboard (US model only)
• Three male-to-female IEC cables
Interface Specification
For more information, see the Setup Guide >>
• Two individually configurable ethernet ports, 802.3af-compliant Poe
• EtCnet2™, net3™ (powered by aCn), saCn and artnet output protocols
• Two DmX512a/rDm ports
• Contact closure triggers via D-Sub connector
• Three female IeC connectors
• Three ‘active’ Display Port-to-DVI adapters. If ‘passive’ adapters are used, only two may be
used at a single time. A third adapter must be an ‘active’
adapter. Displays using an ‘active’ adapter have a max resolution of 1920x1200. Optional
single- or multi-touch screen control
• USB 2.0 multipurpose (11 ports)