ETC Cobalt Family v7.1.0 - Manual (Page 343)

Cobalt 7.1 - 20140612
342
Record a Preset Live
Record a preset in the A field (live):
1. Enter a number
2. Use the level wheel to set an intensity level
3. Press RECORD - you will get a popup suggesting the next free preset number
4. Press RECORD again - you have now recorded a preset
Try out this preset in the Main Playback (live):
1. Enter 0 and press GOTO - lights in A fade to zero
2. Enter the number of the preset you just recorded and press GOTO - it should now fade in
NOTE
The Main Playback and the Master Playbacks share intensities using HTP
(Highest Takes Precedence) logic. Channels with intensities coming from
Master Playbacks may not appear to fade in the Main Playback if the levels
from the masters are the same or higher than those in the Main Playback.