ETC Cobalt Family v7.1.0 - Manual (Page 906)

Cobalt 7.1 - 20140612
905
• [#] [FCB_Delay] - Sets the FCB times to # for the moving device channels, in the A or B
field of the main playback depending on the settings for times.
For more information see Sequence Times - FCB Times .
There is no keyboard equivalent
Console Key - FCB TIME
The FCB TIME soft key in the Times soft key page, is used to set a time to FCB for the moving
device channels.
• [#] [FCB_Time] - Sets the FCB times to # for the moving device channels, in the A or B field
of the main playback depending on the settings for times.
For more information see Sequence Times - FCB Times .
There is no keyboard equivalent
Console Key - FLASH
The lower row of masters in the Cobalt console and the large fader wing of the Congo Jr are equipped
with two keys per master. The top key is the master key used to load content, and the lower key is a
flash key. The flash key can be set to different modes and levels.
• [Flash key] - Flash the content of a master.
• [SETUP] & [flash key] - Open settings for a master.
• [#] [FLASH MODE] & [flash key] - Set a flash level for a master.
For more information see Master Playbacks - Flash Keys .
There is no keyboard equivalent
Console Key - FLASH MODE
The lower row of masters in the Cobalt console and the Congo Jr Master Playback Wing, the
Universal wings and Congo Kid masters are equipped with two keys per master. The top key is the
master key used to load content, and the lower key is a flash key. The flash key can be set to different
modes and levels.
• [FLASH MODE] (held) - Shows master settings in console display, use page +/- to step
through and press the Master Key to toggle settings.
• [#] [FLASH MODE] & [flash key] - Set a flash level for a master.
• [C/Alt] & [FLASH MODE] - Disable flash mode (toggles)
For more information see Master Playbacks - Flash Keys .