ETC Cobalt Family v7.1.0 - Manual (Page 625)

Cobalt 7.1 - 20140612
624
Record A Beam Palette
1. Select channel(s)
2. Initiate recording of next free Palette or Palette #
Function Key Feedback
Record [RECORD] & [BEAM] Records the next free Beam
palette. You will get a
popup*
Record as... [#] [RECORD] &
[BEAM] Records as palette #.
You will get a popup*
Record Direct [RECORD] &
[direct_select] Records to a direct select in
palette mode. You will get
a popup*
*Popup
3. Enter a text (optional)
4. Select Recording mode. For Focus Palettes this is usually "Each Device Type".
See
Each Device or Each Device Type .
5. Press MODIFY to confirm recording.
NOTE
The MASK function can be used to filter out unwanted parameters when
recording a Palette. See
Device Control - Mask .