ETC Cobalt Family v7.1.0 - Manual (Page 184)

Cobalt 7.1 - 20140612
183
Channel Settings
The Channel Settings are general for all Channel Views.
Function Explanation Default value
ID Level The level used by the ID function
(hold CHANNEL and press
@LEVEL) 100%
Step Level The Level applied when pressing
@LEVEL without any value 70%
Step % Value The Level applied when pressing
the +/-% keys 5%
Release Time Default release time for Captured
channels 3**
Slower level wheel
response Reduces the response speed of the
level wheel Off
Use REM DIM as Balance Sets the function of the REM DIM
key to BALANCE
Off***
Channel Database Texts Sets a text header for the Channel
Database texts -****
** See Channels - Capture Mode
***See Channels - Balance Mode
****See Channel Database