ETC Cobalt Family v7.1.0 - Manual (Page 941)

Cobalt 7.1 - 20140612
940
Shortcuts - Channel Levels
These are keys and shortcuts for setting levels to the currently selected channels. Some of them
assume the Command Syntax is set to RPN - see
Channels - Command Syntax .
DESCRIPTION SYNTAX
Set the selected channels to 70%, second press sets
100% [@LEVEL]
Set a level to the selected channels
[#] [@LEVEL]
Clear and deselect the selected channels [C/Alt] & [@LEVEL]
Set 100% [C/Alt] & [+%]
Set 0%
[C/Alt] & [-%]
Increase the level of selected channels 5% [+%]
Decrease the level of selected channels 5% [-%]
Increase the level of channel # with 5% [#] [+%]
Decrease the level of channel # with 5%
[#] [-%]
Increase the level of selected channels #% [#] [.] [+%]
Decrease the level of selected channels #% [#] [.] [-%]
Set level in internal resolution (0-255) [#] [.] &
[@LEVEL]
Fetch values to the selected channels from a preset
[#] [ON/FETCH]
Increase level in 1 bit steps [.] & [+%]
Decrease level in 1 bit steps [.] & [-%]
Set the last recorded level for the selected channel(s). [ON/FETCH]