ETC Cobalt Family v7.1.0 - Manual (Page 585)

Cobalt 7.1 - 20140612
584
Device Control - Home Positioning
The HOME ATTRIB key in the programming section allows you to set devices or parts of devices to
their home position. Home positioning of a device means setting all parameters (or part of them) to the
default values defined in the template of this device. Normally this means setting pan and tilt to 50%,
color to white and all other parameters to neutral. (See
Devices - Templates )
These functions apply to the currently selected channel(s)
Action Key Feedback
All attributes
[HOME_ATTRIB]
[HOME_ATTRIB]
All parameters are set to
home
Focus
[HOME_ATTRIB] &
[FOCUS]
Focus parameters are set to
home
Color
[HOME_ATTRIB] &
[COLOR]
Color parameters are set to
home
Beam [HOME_ATTRIB] &
[BEAM] Beam parameters are set to
home
Single parameters [HOME_ATTRIB] &
[Wheel_Key] Parameter # is set to home
Another way of doing the same thing
Action Key Feedback
Focus
[0] [FOCUS]
Focus parameters are set to
home
Color [0] [COLOR] Color parameters are set to
home
Beam [0] [BEAM] Beam parameters are set to
home
All attributes
[C/Alt] &
[ATTRIBUTES]
All parameters are set to
home