ETC Cobalt Family v7.1.0 - Manual (Page 577)

Cobalt 7.1 - 20140612
576
In the case of a scroller, this is handled automatically by assigning the scroller to the dimmer
controlling the intensity of the fixture. In any other case, use a compund device template.
All parameters of all parts of a compound device will be shown as attributes when this device is
selected.
This is what the template for a compound device can look like
Devices - Media Servers
A media server is no different from any other device - patch the template and use it. However we have
created a standardised interaction interface (CITP with a MSEX extension) that allows interaction
with the ArKaos media server, in a specific version of ArKaos. It is probable that more media server
manufacturers will adopt this new communications standard which will allow Cobalt to have similar
interactivity with servers from Coolux, Green Hippo and others.
ArKaos support
1. Before trying this interaction make sure the ArKaos system is up and running on the network, with
the right show loaded.
2. You must patch the layers of the media server first, and all layers of a single server must be patched
to a continuous range of channels. Enter the channel number that the first layer will be mapped to.
Subsequent layers will be mapped to the following channels. The number of layers is defined in the
ArKaos software.
3. When an ArKaos system is detected, it will show up under Network Devices in the Browser. Double
clicking on the ArKaos item will allow you to connect to it. A popup will confirm the connection.
When you connect to an ArKaos system, the names of the available media will be transferred into the
ArKaos template and can be used in all situations where a range name normally occurs. For this to
work, you need to use the Arkaos full fixture mode template.
• When connecting to the ArKaos system, all old media names in the ArKaos template will be cleared
first.
• Unused media names will be set to #: No name.