ETC Cobalt Family v7.1.0 - Manual (Page 157)

Cobalt 7.1 - 20140612
156
System Settings - Universe Map
Each server in a multiple server system requires a logical network of it's own. There are ten networks,
0-9. In each of these networks you can set a name, and the EDMX, sACN and Artnet mapping.
In a setup with several systems in the same network, such as for example a television studio, you can
assign names to the networks belonging to each studio.
When the system is started these names will appear in the top right corner of the Welcome screen.
Use the up/down arrows to select and MODIFY to activate.
HINT
If you want to turn the protocol off for a specific universe, set it to zero.