ETC Cobalt Family v7.1.0 User Manual

Page 822

Advertising
background image

Cobalt 7.1 - 20140612

821

Please note that some settings will make other settings invalid - for example, if you set a master to
Inhibit, the main function will be inhibit.

Function

Function

Mode

Inclusive = playback interacts with other playbacks
Inhibit = fader limits the output of the preset ch's
Exclusive = fader "owns" preset intensities

Exclude Int from Record Excludes intensity from this master from recording

Master button

Default = Select channels in preset as group
Start = Toggles fader to full/zero
Execute Attributes = Only executes attributes
Flash = Flashes the content

Include intensity

Playback will control intensities

Attributes follow fader

Playback fader will control attributes

Fader type

Add = Adds intensities HTP
Solo = Replaces the content of all other masters

Fader: Use time

Fader will never fade faster than the fade time

Return to (FCB)

Specifies where attributes return to when the fader is
faded down

Off = No return target
Previous = Status before the fade
Preset = To a specified preset
MainPB = To the preset in A of the main playback

Preset

Return to preset, if selected in previous choice

Active Parameter Lock

Attributes can not be stolen by any other playback.
Manual override is possible.

Flash button

Off = No function
Momentary = Flash when pressed
Latching = Toggles flash off/on

Flash type

Add = Adds intensities HTP
Solo = Replaces the content of all other masters

Flash mode

All = Intensities and attributes
Intensity = Intensities only
Attributes = Attributes only

Flash: Use time

Flash will use master time

Flash Level

Sets the target level for flash

Advertising