ETC Cobalt Family v7.1.0 - Manual (Page 918)

Cobalt 7.1 - 20140612
917
• [MODIFY] & [GROUP] - Opens the Group List.
• [MODIFY] & [SEQ] - Opens the Sequences List.
• [MODIFY] & [DYN EFFECT] - Opens the Effect List.
• [MODIFY] & [FOCUS] - Opens the Focus Palette List.
• [MODIFY] & [COLOR] - Opens the Color Palette List.
• [MODIFY] & [BEAM] - Opens the Beam Palette List.
• [MODIFY] & [PALETTE] - Opens the All Palette List.
• [MODIFY] & [U1-U3] - Opens the Wheel Parameter Lists.
• [MODIFY] & [PARK] - Opens the Park List.
• [MODIFY] & [NOTE] - Opens the Notes List.
• [MODIFY] & [master key] - Opens the Master Editor.
This key is so fundamental it is described everywhere in this manual.
Keyboard equivalent: [ENTER]
Console Key - MODIFY SEQ
The MODIFY SEQ key is a soft key in the MISC menu of the main display. It is used to toggle the
Modify Sequence mode on or off (default). When Modify Sequence is on, you can advance the
sequence in the main playback without triggering auto times or wait times and master links.
• [MODIFY SEQ] - Toggle this mode on/off.
For more information see Sequences - Build & Modify Modes .
There is no keyboard equivalent
Console Key - MUTE
The MUTE key is used to inhibit the output of a Master Playback.
• [MUTE] & [master key] - Temporarily mutes the output of that master playback.
For more information see Mute & Solo - Mute .
Keyboard equivalent: None
Console Key - NEXT
The NEXT key is used to select the next channel within the current channel selection. This is useful
for adjusting single moving devices within a selection, and also for selecting a specific device as
reference point for the Fan and Align functions.
• [NEXT] - Press NEXT with more than one channel selected to activate Next/Last mode.
Press SELECT ALL to exit.