ETC Cobalt Family v7.1.0 - Manual (Page 923)

Cobalt 7.1 - 20140612
922
Console Key - PASTE
The PASTE key is used to paste information that has been copied or cut. Information that can be
copied, cut and pasted is Text, Sequence Steps (Sequence List), Groups (Group List), Presets (Preset
List), Device Templates (Device Template List) and Attributes in the Preset List.
• [PASTE] - Paste the last copied or cut object. In the Preset List a numerical argument is
needed first.
For more information see Copy, Cut & Paste .
Keyboard equivalent: [CTRL] & [V]
Console Key - PLAYBACK
The PLAYBACK key selects the Playback tab and sets the channel control to the live output, through
the A field of the Main Playback.
• [PLAYBACK] - Select the Playback tab.
• [#] [SEQ ] & [PLAYBACK ] - Load a sequence to the Main Playback.
• [C/Alt] & [PLAYBACK ] - Bring all channel levels from the Playback (A and B) to zero.
For more information see Live .
Keyboard equivalent: [X]
Console Key - PLAYLIST
The PLAYLIST key is used to activate the Playlist for the Main Playback.
• [PLAYLIST] - toggles the Playlist on/off.
For more information see Playlist .
Keyboard equivalent: None
Console Key - PLUS
The PLUS key (+) is part of the channel select keys. It is used to add a channel to the current
selection. It is also used for the Channel Check function.
• [#] [+] - Add the channel to the current selection, (if the console is set to operate in At Mode
press MINUS and then enter the number).
• [C/Alt] & [+] - Make a channel check to the next channel with the current level.
• Hold [+] & [master key] - Add the channels in that master from the current selection.