ETC Cobalt Family v7.1.0 - Manual (Page 788)

Cobalt 7.1 - 20140612
787
Independents - Introduction
The Independents offer a control surface for potentiometers and keys to which you can assign
channels that can be excluded from normal control and recording.
In Cobalt there are six independent potentiometers. These can be used for
• Adding light (inclusive mode)
• Removing light (inhibit mode)
• Independent lights (Exclusive mode)
There are three independent keys. These can be used as toggle or flash for
• Houselights
• Smoke machines
• Relays