ETC Cobalt Family v7.1.0 - Manual (Page 399)

Cobalt 7.1 - 20140612
398
These are the functions available. All times are set to the Main Playback.
Function Softkey Feedback
Channel time [#] [CH_TIME] Sets a channel time (#) to the
selected channels.
Channel delay [#] [CH_DELAY] Sets a channel delay time (#) to the
selected channels.
Wait
[#] [WAIT]
Sets a Wait time (#) to the Preset in
A (or B).
Out [#] [OUT] Sets an out time (#) to the Preset in
A (or B).
Delay out [#] [DELAY_OUT] Sets a Delay Out time (#) to the
Preset in A (or B).
Delay in [#] [DELAY_IN] Sets a Delay In time (#) to the
Preset in A (or B).
In [#] [IN] Sets an In time (#) to the Preset in A
(or B).
FCB time
[#] [FCB_Time]
Sets FCB times (#) to the Preset in
A (or B).
FCB delay [#] [FCB_Delay] Sets FCB delay (#) to the Preset in
A (or B).
Learn Alert * [Learn_Alert] Activates Learn Alert Time mode.
Learn Profile [Learn_Profile] Activates Learn Profile mode for
the next crossfade.
See
Sequences - Crossfade Profiles .
* See Sequence Times - WFA Alert Times .
Sequence Times - FCB Times
FCB Times are set to the Preset of a Sequence Step. See Moving Device Times - FCB Time
Sequence Times - Parameter Times
Individual Moving Device Parameter times are set to the preset of a Sequence Step. See Moving
Device Times - Parameter Time .
Sequence Times - WAF Alert Times
An Alert time will count down from the completion of the previous crossfade, and alert the operator as
to when the next fade should be manually executed.