ETC Cobalt Family v7.1.0 - Manual (Page 856)

Cobalt 7.1 - 20140612
855
Fading Two Scene Masters
To fade the settings and content of the top row of masters (blind) into the bottom row of masters (live)
press START or GO on the Masters Playback.
You can enter a time before pressing START or GO. This time will continue to be used until a new
time is entered.
NOTE
Any changes you make to content in the top masters will be loaded to the
bottom live masters, but ONLY if the fader of the master is over zero %.
It is possible to modify the Live masters at all times except when there is a
crossfade running between Live and Blind because of the dipless calculation.
In Cobalt 10: Press RANGE to the other upper/lower bank.