ETC Cobalt Family v7.1.0 User Manual

Page 163

Advertising
background image

Cobalt 7.1 - 20140612

162

by the console (whether it is served via DHCP or a self-generated link-local IP
address).

Network - Console

Obtain an IP Automatically - Clicking in the enable box will set Cobalt to get its IP address

dynamically from a DHCP server. While the console is starting, it will ask for an IP address
from a DHCP server. If one responds, it will use the assigned IP address.

If no DHCP server is available, Cobalt will default to a self-generated link-local IP address in
the range of 169.254.x.y. The IP address used by Cobalt in this configuration may change
dynamically as needed. A change should typically only occur when there are changes to the
network configuration or to resolve an IP address conflict. Enabling or disabling the DHCP
setting will require you to reboot Cobalt for the new setting to take effect.

IP address

o

If DHCP is disabled, you set the Cobalt IP address here. This is a static IP address
and will remain set until changed by a user.

o

If DHCP is enabled, this field will display the IP address that is being used by the
console (whether it is served via DHCP or a self-generated link-local IP address).

Subnet mask

o

If DHCP is disabled, you set the Cobalt subnet mask here. This is a static setting
and will remain set until changed by a user.

o

If DHCP is enabled, this field will display the subnet mask that is being used by the
console (whether it is served via DHCP or a self-generated link-local IP address).

Gateway

o

If DHCP is disabled, you set the Cobalt gateway IP address here. This is a static
gateway IP address and will remain set until changed by a user.
If DHCP is enabled, this field will display the gateway IP address that is being used
by the console (whether it is served via DHCP or a self-generated link-local IP
address).

Physical Address - This is the address of the computer. On a typical ETC lighting network,

the default settings for IP address of the Ethernet connection for Cobalt is:

IP address: 10.101.84.101
Subnet Mask: 255.255.0.0

Advertising