ETC Cobalt Family v7.1.0 - Manual (Page 738)

Cobalt 7.1 - 20140612
737
Dynamics - Record
Dynamic Effects are recorded in Presets for playback.
• Only Dynamics that have changed or are started since you last pressed RECORD will be
stored.
• Record Mode should be set to AUTOMATIC for attributes.
• A "Keep Dynamic" flag can be set to a Preset. This will allow the Dynamic to move to new
base values without stopping the Dynamic.
Record Changed Dynamics
Function Key Feedback
Record* Dynamics to
Preset # [#] [RECORD] All channels are recorded
including all running
Dynamics to Preset #
*Record Mode has to be set to Automatic for Attributes - See Devices - Recording Modes .
Record Dynamics To Another Preset
Function Key Feedback
Record* Dynamics to
Preset # [#] [RECORD] &
[DYN_EFFECT] All changed and/or selected
channels are recorded with
running Dynamics to Preset
#
*Record Mode has to be set to Automatic for Attributes - See Devices - Recording Modes .
Record Dynamics To A Master
Function Key Feedback
Record* Dynamics to
Master #
[RECORD] &
[Master_Key]
Selected channels are
recorded including running
Dynamics to Master # as
the next free Preset.
*Record Mode has to be set to Automatic for Attributes - See Devices - Recording Modes .