ETC Cobalt Family v7.1.0 - Manual (Page 202)

Cobalt 7.1 - 20140612
201
Console Settings
The Console Settings are set from the node Console Settings in the Setup node of the Browser.
(Browser >General Settings >Console Settings).
You can set the values from 0-100%. They will take effect immediately and are NOT related to
different play files.
At Mode
Sets At Mode for the console. An indicator will show that it is active, in the status bar at the bottom of
all screens.
At Mode point style
This allows you to enter levels "5.5" for 55 and then ".6" for turning that into 56.
Auto Close Tab Mode
When this is checked you will close the previous tab when opening a new one, to keep the number of
tabs down.
See RDM Functionality .
See Channels - Command Syntax
Key Backlighting in Cobalt