ETC Cobalt Family v7.1.0 - Manual (Page 64)

Cobalt 7.1 - 20140612
63
• Sequences
• Console keys
See Masters .
Playing back Presets and the main sequence.
• As soon as a preset is recorded you can play it back in the Main Playback or any of the 80
Master Playbacks.
See
Presets - Load To Playbacks .
• All presets that have been recorded in Live have been added to the Sequence of the Main
Playback as Steps with default fade times (5s). They can be played back with or without this
default time, or manually.
See
Main Playback .
Rules for playback
• Intensities will play back following HTP (Highest Takes Precedence) between all playbacks.
• Attributes are LTP (Latest Takes Precedence). As soon as they are triggered they will move
to this position. They are never owned by a playback.
Exceptions
• CAPTURE will override all normal playback features and "hold" the values of intensities
and/or attributes.
See
Capture .
• There is a PARK feature to park any intensity or parameter at a fixed value.
See Parked .
• There is an exclusive mode for the Independents and Master Playbacks, that will "remove"
the intensity of the assigned channels from the normal functionality of the console.
See
Independent Modes .
• There is an INHIBIT mode for the independents and Master Playbacks, that allow you to
filter the maximum output of an intensity channel.
See
Independent Modes .
• There is a FREEZE mode that will maintain a static DMX output so you can work
completely blind.
See
Output Switch .
Edit (workflow)
Once a Play is recorded you will want to edit and adjust data. Most of the functionality in Cobalt is
about editing. Here is where basic data is edited.