ETC Cobalt Family v7.1.0 - Manual (Page 667)

Cobalt 7.1 - 20140612
666
User Masks - Functions
You can save and label up to 999 different combinations of masked parameters. These Masks can then
be applied to masters as playback masks, or to the Global Mask for use when recording Palettes or
Presets. They are stored in the Mask List (Browser > Devices >Masks).
To record a user Mask:
1. Set up the Global Mask any way you want (See Global Mask - Functions )
2. Enter a number, hold RECORD and press MASK (with no preceding number the next free
Mask is recorded)
To recall a user Mask:
1. Enter a number and press MASK or
2. Press a Direct Select for this Mask.
To load a user Mask to a master:
1. Enter the number, hold MASK and press the Master key.
- This will load this mask as a playback mask for the content of this master.
You can use # INSERT and DELETE to add or remove masks from this list, and you can edit them by
pressing MODIFY in the Mask cell - which will open the Mask Editor for that Mask.