ETC Cobalt Family v7.1.0 - Manual (Page 982)

Cobalt 7.1 - 20140612
981
The Patch functions are
Function Key Feedback
Select channel [#] [Chan] Channel # is selected
Select output
[#] [Output]
Output # is selected
Select output universe [#] [Univ.] Universe # is selected
Patch channel to output [#] [Chan] [#]
[Patch] Channel # is patched to
output #
Patch output to channel [#] [Output] [#]
[Patch] Output # is patched to
channel #
Re-patch a device [#] [Chan] [#]
[DvAddr] Device on channel # is
patched to output #
Note: Existing devices may
be repatched. No new
devices may be patched
from the RFR.
• Outputs can be selected in address.universe format. For example [10.3] [Output] will select
output 10 on universe 3.
• Use the left wheel to jump to next output and the right wheel to set a level to the selected
output.
• Use a number and the @ button to set a channel or output level directly (instead of the right
wheel).
• Use +/- to step outputs as well as channels.
RFR Palettes
Press MORE SK and then PALETTE to enter the Palette sub menu.
Focus Color Beam
• The FCB buttons can be pressed without a number to present a palette list or with a number
to select a palette directly.
• In the palette list, use one of the wheels to scroll and press the wheel to select the focused
palette.
• Entering 0 and selecting a palette type will home the values of this palette type.