Channels - rem dim – ETC Cobalt Family v7.1.0 User Manual
Page 484
Advertising
Cobalt 7.1 - 20140612
483
Channels - Rem Dim
The REM DIM key in the
programming section
will set all channels in the Channel Control to zero,
except the currently selected channel(s).
Function
Key
Feedback
Dim remaining
[REM_DIM]
All channels in the
Channel Control
are set to zero,
except the current
selection.
NOTE
It is possible to set the REM DIM key to function as BALANCE. This is done
in the System Settings. See
System Settings - Channel
Advertising