ETC Cobalt Family v7.1.0 - Manual (Page 831)

Cobalt 7.1 - 20140612
830
Masters - Sequences
Enter the number, hold SEQUENCE and press a Master Key to load to that Master.
You can record, load and play back sequences from master playbacks. They are displayed with an "S"
before the number in the master displays.
Once a sequence is loaded to a master you can
• Use the master fader to control the output level
• Use the flash key to flash the sequence
• Use the master key as a GO or Go/Pause key
• Use the flash key as a GoBack key
• Hold MODIFY and press the master key to open the sequence editor
Attributes are executed only when the fader is over zero.
Load a sequence to a master
These functions are used to load sequences to masters..
Function Keys Feedback
Load a sequence [#] [SEQ] &
[Master_Key] Sequence # is loaded. The
number and name is shown
in the master display. If the
sequence doesn't exist it is
created.
Load several sequences [#] [SEQ] &
[Master_Keys] Hold SEQ and keep
pressing new Master keys
to load the next stored
Sequences.
NOTE
You can load a Sequence directly from the Sequences List as well. See
Sequences List - Insert/Delete/Load .