ETC Cobalt Family v7.1.0 - Manual (Page 877)

Cobalt 7.1 - 20140612
876
Master Pages - Times
Master Playback times can be stored in Master Pages. Times are set from 0.1seconds to 49.59 minutes
(0.1- 4959).
General Facts
• A Master Playback can have an in/wait/out time.
• A Master Page can have a general time used for all Palettes and Presets.
• A Master Page can have a BPM time for all Chases.
Master Page Times - In, Out, Wait
Fade times for a Master Playback can be stored in a Master Page.
The times are activated in the following situations
• When the master is linked from a Sequence Step.
• When you hold START and press the Master Key.
• When Flash On Time is active (SETUP & Master Key).
Function Keys Feedback
1. Activate the Master
Pages List Browser >Master
Pages The Master Pages List is
opened.
2. Activate a Master Page
List Arrow keys The Master Page List is
opened.
3. Go to In-Wait-Out Times Arrow keys Each selected cell is
highlighted
4. Set a time* [#] [MODIFY]
A time of # is set.
Master Page Times - Page Time
The Master Page Time is used for Palettes (content= palette) and Presets with In times set in %.
Function Keys Feedback
Set Master Page Time* [#] [TIME] &
[PAGE] A Master Page Time # is
set to the currently loaded
Master Page.
*The Master Page Time can be set from the Master Page List as well.