ETC Cobalt Family v7.1.0 - Manual (Page 803)

Cobalt 7.1 - 20140612
802
Mode Applies to Feedback
Fader type Ch, group, preset,
effect Add = Intensities are piled (HTP)
on top of the output. Attributes are
LTP.
Solo = The content of this fader
replaces all other master faders, but
does not affect levels coming from
the Main Playback.
Fader intensity Ch, group, preset,
effect, chase, Sequence Disabled = intensity is not affected
by moving the fader
Follow manual fader = Intensities
will follow the fader
Follow master time = follows
master times
Fader Attributes Preset, effect, palette Disabled = attributes are not
affected by moving the fader
Follow manual fader = Attributes