ETC Eos Titanium, Eos, and Gio v2.0.0 - Manual (Page 104)

86 Eos Titanium, Eos, and Gio Operations Manual
Flexichannel Views in Patch
In patch by channel mode, [Flexi] can be used to view only those channels that are currently
patched. In patch by address mode, [Flexi] can be used to view only those addresses that are
currently patched. By pressing [Flexi], you can toggle the view between patched channels/
addresses, selected channels, and all channels/addresses.
Holding down [Flexi] will display the following softkeys:
• {Flexi All} - displays all the channels or addresses depending on which view is used.
• {Patch} - displays only the patched channels or addresses.
• {Selected} - displays any selected channels or addresses.
• {View Channels} - displays those channels selected for the View Channels flexichannel
state.
• {Partitioned} - only available when partitioning is enabled. Displays the following options:
• Partitioned Channels
• Partitioned Patched Channels
• Partitioned Selected Channels
• Partitioned View Channels
Labeling
To label a channel or address, press the [Label] key with the channel or address selected on the
command line. You can use the virtual alphanumeric keyboard or an external keyboard to enter the
desired label text.