Playback status display – ETC Eos Titanium, Eos, and Gio v2.0.0 User Manual
Page 79
4
System Basics
61
Playback Status Display
The playback status display allows you to view a range of cues in the current cue list, all cue
attributes for those cues, and a view of the fader configurations for 10 pages of 10 faders each (for
a total of 100 visible faders.
Holding down [Time] (the one by [Delay]), while a cue is fading, will display the cue category times
counting down in the cue list display area. The default action is to show the total time not the
countdown. To always show the countdown, a {PSD Time Countdown} option is available in
Setup, see
. When the {PSD Time Countdown} is enabled, the cue category
times will countdown as a cue is fading. To see the total time, hold down the [Time] key. {PSD Time
Countdown} is “disabled” by default.
When focus is on the playback status display, you can use the paging keys to navigate in the
display. An optional command line for the playback status display is available. The optional
command line must be enabled to use.
There are three formats for the playback status display. By default, it will be an expanded cue list
format. When the focus is on the playback status display, press [Format] to toggle between the
formats.
Expanded Cue List Format
Pressing [Format] with the playback status display active will access this format. In expanded cue
list, the view of the active cue list increases to the full size of the display. The current fader page is
still visible at the bottom of the screen.
Fader page
number
Fader numbers
Sneak Counter