Partial patch opening – ETC Eos Titanium, Eos, and Gio v2.0.0 User Manual
Page 94
76
Eos Titanium, Eos, and Gio Operations Manual
see the complete list of show components, press the {Advanced} key in the partial show loading
screen.
As you specify components, they are added to a table in the CIA. In the table, fields with a dark
background may be edited, fields with a light gray background do not apply to that component. For
each component in the list, you can specify the desired range by pressing the proper area in the
table and entering numbers from the keypad. The columns in the table are:
•
List - The list you are taking data from (such as a cue list).
•
List Target - The list you are adding the data to.
•
Start - The first in a range of components (such as a range of cues).
•
End - The last in a range of components.
•
Target - The desired location of the components in the new show file (for ranges, this
will be the location in the new show of the first component in the range, the others will
follow in order).
To open only partial components from a show file:
Step 1:
From the browser, navigate to the desired show file (see
).
Step 2:
When the partial show load screen appears, press the {Advanced} button. The
partial components selection screen will appear in the CIA.
Step 3:
Select the show components that you wish to load by pressing on their respective
buttons on the left side of the CIA. The components will appear in the list to the right
as you select them.
Step 4:
Press any fields for which you want to enter specific numbers. The field (if editable)
will highlight in gold.
Step 5:
Enter the numbers using the keypad to specify the desired cues/groups/effects and so
on.
Step 6:
Press {OK} to load the components to the new show.
You may exit the partial show load screen at any time by pressing the {Cancel} button. This will
return you to the browser.
You may clear all selected components from the table at any time by pressing the {Reset} button.
You may exit the advanced loading screen at any time by pressing the {Advanced} button. This will
return you to the general partial show load screen.
Partial Patch Opening
You have the option to selectively open partial patch information or fixtures into a show file by
selecting the {Advanced} button in the partial show opening screen. Select {Patch} or {Fixtures}.
Selected Show Components